新闻资讯

当前位置:首页 >资讯中心 > 新闻资讯 > 文章内容

Penchem光纤胶水UV566资料

点击:2802 日期:2015-04-29 选择字号:


Penchem光纤胶水 UV 566-1 Structural UV Epoxy

Description

UV 566-1 is a fast cure, high viscosity UV-curable epoxy system.  The cured material has excellent flexibility, good toughness and good adhesion to a variety of substrates including metals and plastics.  It has low odor, and low skin and eye irritation potential.  It does not contain volatiles and is very suitable for electronic applications.  It is not inhibited by oxygen during UV cure, has low shrinkage, high gloss and good resistance to yellowing. The thixotropy has been adjusted to control excessive overflow. 


Applications 

1. UV curable adhesive for plastics and metals. 


Guidelines for Use 

1. Thaw the epoxy to room temperature (25ºC) before use. 

2. Dispense the epoxy by using a syringe. 

3. Wipe off any excess uncured adhesive with a piece of dry cloth or tissue.  Further cleaning may be achieved with tissue dabbed with iso-propanol.alcohol (IPA).  

4. Expose the epoxy to long UV wavelength light in the 320-380 nm range at 1000 mW/cm2 for 3 seconds. 

5. If necesscary, ultimate properties may be obtained faster by additional curing of the epoxy in a convection oven at 100ºC or higher for 60 minutes.  

Properties  


Recommended Cure 


Storage 

Tightly close original container of unused product.  Store below -20ºC. Storing at lower temperatures down to -40ºC may prolong shelf life beyond 6 months.  However it may take longer time to thaw the product. 


Packaging

 30ml Black EFD Syringe 

 500g Black Plastic Bottle


Environment, Health & Safety 

This product is RoHS compliant.  It does not contain any known carcinogenic, mutagenic or teratogenic components. 


此文关键词:Penchem光纤胶水UV566

评论信息

暂无留言!
发表评论
姓名:
内容:
验证码:点击换一个 看不清?
[登录] 后留言,没有注册的请[注册]!

1.尊重网上道德,遵守中华人民共和国的各项有关法律法规,不发表攻击性言论。
2.承担一切因您的行为而直接或间接导致的民事或刑事法律责任。
3.产品留言板管理人员有权保留或删除其管辖留言中的任意内容。
4.不支持HTML代码且留言要通过审核后才会显示,请勿恶意留言。